Motorola BSR 2000 manual Show packet-cable gate, Sfid

BSR 2000 Command Reference Guide Release 1.0

show packet-cable gate

The show packet-cable gate command display the gate ID in hexidecimal notation, CM MAC address, CPE (subscriber) IP address, cable slot number, upstream and downstream Service Flow Identifier (SFID) number, status and committed time gate summary information

The following provides typical screen output from the show packet-cable gate command:

DQoS Gates: 2

--------------------------------------------------------------------------------

GateID	Modem	Subscriber	CM	SFID	Pri	Status	Committed
(0x)	MAC Address	IP Address	TS Up	Dn			Time

--------------------------------------------------------------------------------

00000D3C 0011.8065.f57a	150.31.55.101		0	57	58 Low	Committed 00:21:58
00000E86 0011.8065.f580	150.31.55.102		0	55	56 Low	Committed 00:21:58
The following provides the show packet-cable gate command output field
descriptions:
GateID (0x)		display the gate Identifier in
		hexadecimal notation
Modem MAC Address		cable modem (CM) MAC address
Subscriber IP Address		Client IP address
CMTS		This number is always 0 for the BSR
		2000.
SFID		display the upstream (Up) SFID
		number, and the downstream (Dn)
		Service Flow Identifier (SFID)
		number.
Pri		gate priority, which is either high or
		low.
Status		gate status
Committed Time		time at which the gate was
		committed

16-50 MGBI 526363-001-00 Rev. B