Motorola BSR 2000 manual Docstest disable enable, Enable Enable Docsis 2.0 test mode

Release 1.0 CMTS Commands

docstest

The docstest command globally enables or disables DOCSIS 2.0 test mode on the BSR through the DOCSIS 2.0 Testing MIB (SP-TestMIBv2.0-D02-030530). The DOCSIS 2.0 Testing MIB is used to test DOCSIS 2.0 protocol compliance through a set of objects used to manage DOCSIS 2.0 Cable Modem (CM) and Cable Modem Termination System (CMTS) programmable test features.

Note: The DOCSIS 2.0 Testing MIB is considered to be an adjunct to the DOCSIS 2.0 Specification rather than a part of that specification. Support for this MIB does not indicate compliance with the DOCSIS 2.0 specification. Conversely, lack of support for this MIB does not indicate non-compliance with the DOCSIS 2.0 specification. However, support for this MIB is mandatory for all DOCSIS 2.0 compliant CMs and CMTSs that are submitted for Certification and Qualification by CableLabs.

Once DOCSIS 2.0 test mode is enabled with the docstest enable command, the BSR remains in DOCSIS 2.0 test mode until the test mode is disabled with the docstest disable command or the system is rebooted.

Group Access

MSO

Command Mode

Privileged EXEC

Command Line Usage

docstest {disable enable}

Command Syntax

disable	disable DOCSIS 2.0 test mode
enable	enable DOCSIS 2.0 test mode

Command Default

Disabled

526363-001-00 Rev. B MGBI 11-127