interface index
displays the user-defined description of the upstream port
center frequency for cable modem use initial ranging backoff fixed start value initial ranging backoff fixed end value initial data backoff fixed start value initial data backoff fixed end value radio frequency channel width
power level in units of whole dB to one decimal place
port minislot size in number of time ticks forced fragmentation enabled configured map interval value pre-equalization adjustment enabled
the number of invited range interval requests configured for this upstream channel
range forced continue enabled
specifies whether range power override is enabled (true) or disabled (false)
specifies whether concatenation is on (true) or off (false).
the upstream physical delay configuration upstream data transmission rate-limit
BSR 2000 Command Reference Guide | Release 1.0 |
|
|
show cable upstream
The show cable upstream command displays the following upstream cable information:
ifIndex description
centerFreq rng_back_st rng_back_en data_back_st data_back_en channelWidth powerLevel
slotSize
concatenation
MGBI |