Release 1.0

IP Commands

 

 

trap-enable-if

The trap-enable-ifcommand enables the ifLinkUpDownTrapEnable trap. The ifLinkUpDownTrapEnable trap indicates whether a link up or link down trap should be generated for an interface. The no trap-enable-ifcommand disables the ifLinkUpDownTrapEnable trap.

Group Access

All

Command Mode

Interface Configuration

Command Syntax

trap-enable-if no trap-enable-if

Command Default

Disabled

526363-001-00 Rev. B

MGBI

2-83

Page 287
Image 287
Motorola BSR 2000 manual Trap-enable-if no trap-enable-if