BSR 2000 Command Reference Guide

Release 1.0

 

 

em retry-interval

The event message retry interval can be configured depending on the amount of network congestion and the distance between the BSR and the Record Keeping Server. For example, if the distance caused a time delay, the event message retry interval can be extended from the default value to allow more time for the BSR to receive an Accounting-Response message. The network and the Record Keeping Server should be examined to determine the reason for these timeouts. In most cases the em retry-countcommand parameter should be increased before the em retry-intervalcommand parameter is modified.

The em retry-intervalcommand specifies the event message retry interval for receiving an Accounting Response. The no em retry-intervalcommand restores the default value.

Group Access

All

Command Mode

PacketCable Configuration

Command Line Usage

em retry-interval <1-3600>no em retry-interval

Command Syntax

1-3600

retry interval in seconds

Command Default

2

16-32

MGBI

526363-001-00 Rev. B

Page 1008
Image 1008
Motorola BSR 2000 manual Em retry-interval 1-3600no em retry-interval