
Release 1.0 | CMTS Commands |
|
|
show interfaces cable intercept
Use the show interfaces cable intercept command to view statistical information for each intercepted Customer Premises Equipment (CPE) MAC address.
The show interfaces cable intercept command displays the following CPE information:
MAC Address | MAC (hardware) address of a CPE, such as a |
| customer’s PC or VoIP phone. |
Destination IP Address | IP address of the data collection server. |
Destination UDP Port | UDP Port number that is used exclusively by the data |
| collection server. |
Packets | The total number of packets that have been |
| intercepted from each specified CPE on this CMTS |
| interface. |
Bytes | The total number of bytes that have been intercepted |
| from each specified CPE on this CMTS interface. |
Group Access
MSO
Command Mode
All modes except User EXEC mode.
Command Line Usage
show interfaces cable <X/Y> intercept
Command Syntax
X/Y | X is 0. Y is the CMTS port number |
Command Default
None
MGBI |