Motorola BSR 2000 manual Set tag

Release 1.0 Routing Policy Commands

set tag

The set tag command sets the value of the destination routing protocol. The no set tag command removes the value.

The route-mapglobal configuration command and the match and set route-map configuration commands are used together to define the conditions for redistributing routes from one routing protocol into another. Each route-mapcommand has a list of match and set commands associated with it. The match commands specify the conditions for redistribution for the current route-mapcommand. The set commands specify the particular redistribution actions to perform if the criteria enforced by the match commands are met. The no route-mapcommand deletes the route map.

Group Access

ISP

Command Mode

Route-map Configuration

Command Line Usage

set tag <0-4294967295>no set tag <0-4294967295>

Command Syntax

0-4294967295 tag value

Command Default

if not specified, tag is forwarded to the new destination protocol

526363-001-00 Rev. B MGBI 6-35