Motorola BSR 2000 manual Hop action power-level

BSR 2000 Command Reference Guide Release 1.0

hop action power-level

The hop action power-level command is used to change the power-level setting before

afrequency hop action.Table 11-4describes how the upstream channel bandwidth corresponds to the input power-level range and default power-level range for a specific upstream channel.

Table 11-4 Upstream Input Power Level Range Parameters

Upstream Channel	Default Power-level	Power-level
Bandwidth	Range	Range
200 KHz	-1 dBmV	-16 to +14 dBmV
400 KHz	+2 dBmV	-13 to +17 dBmV
800 KHz	+5 dBmV	-10 to +20 dBmV
1.6 MHz	+8 dBmV	-7 to +23 dBmV
3.2 MHz	+11 dBmV	-4 to +26 dBmV

Group Access

MSO

Command Mode

Cable Spectrum Group

Command Line Usage

hop action power-level {<-160 - +290> default < -150 - +150>} [priority <1-255>]

no hop action power-level {<-160 - +290> default < -150 - +150>} [priority <1-255>]

Command Syntax

<-160 - +290> The input power level, expressed in tenths of a dB.

11-140 MGBI 526363-001-00 Rev. B