
Release 1.0 | Debug Commands |
|
|
debug ip ospf
The debug ip ospf command displays Open Shortest Path First
The debug ip ospf command can be used to do the following:
■
■
■
■
Confirm that the routers match the same IP mask Verify same hello interval
Verify same dead interval
Verify neighbors are part of the same area
Group Access
ISP
Command Mode
All modes except User EXEC
Command Line Usage
debug ip ospf {adj dr events lsa packet retransmission spf [detail] } no debug ip ospf {adj dr events lsa packet retransmission spf [detail] }
Command Syntax
adj | debug OSPF adjacency events |
dr | debug OSPF DR election events |
events | debug all OSPFevents |
lsa | debug OSPF LSA rx/tx events |
packet | debug OSPF packets reception events |
retransmission | debug OSPF retransmission events |
spf | debug OSPF SPF calculation events |
detail | display detailed SPF calculation events debug |
| information |
MGBI |