Motorola BSR 2000 manual Snr loop, 6400000, 800000

BSR 2000 Command Reference Guide Release 1.0

snr loop

The snr loop command allows an operator to perform SNR measurements for a specified number of times on one particular frequency.

Group Access

MSO

Command Mode

Privileged EXEC

Command Line Usage

snr loop {<NUM>} {<NUM>}{<NUM>}{<NUM>}{<frequency>} {1600000 200000 3200000 400000 6400000 800000} [<mac> equalization {off on} ingress-cancel{off on} modulation-type{16qam qpsk}]

Command Syntax

NUM	This number is always 0 for the BSR 2000.
NUM	valid upstream port number (0-3)
NUM	the number SNR measurement repetitions
	(1-100)
NUM	a ranging pattern number used to look up a
	certain pattern to be used for SNR
	measurement
frequency	the particular frequency to perform SNR
	measurements on
1600000	channel width 1600 kHz
200000	channel width 200 kHz
3200000	channel width 3200 kHz
400000	channel width 400 kHz
6400000	channel width 6400 kHz
800000	channel width 800 kHz

11-262 MGBI 526363-001-00 Rev. B