BSR 2000 Command Reference Guide

Release 1.0

 

 

cable upstream pre-equalization

The cable upstream pre-equalizationcommand enables pre-equalization adjustment on the upstream port that includes sending pre-equalization coefficients in a ranging response to a CM to compensate for impairment over the transmission line. The no cable upstream pre-equalizationcommand disables the pre-equalization function.

Note: Not all CMs support the pre-equalization adjustment. If a CM does not support this adjustment, the BSR CMTS interface may not be able to receive upstream data correctly from the CM.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <NUM> pre-equalization no cable upstream <NUM> pre-equalization

Command Syntax

NUM

Upstream port number

11-98

MGBI

526363-001-00 Rev. B

Page 644
Image 644
Motorola BSR 2000 manual Cable upstream pre-equalization