Motorola BSR 2000 manual Show packet-cable configuration

BSR 2000 Command Reference Guide Release 1.0

show packet-cable configuration

The show packet-cable configuration command displays COPS, DQoS, event messaging, electronic surveillance, and PacketCable Multimedia configuration information.

The following provides typical screen output from the show packet-cable configuration command and output field descriptions:

PacketCable Configuration

-------------------------

CMTS IP address: 150.31.50.10

COPS Configuration

------------------

PEP ID: Motorola CMTS

Client Timer: 4000 milliseconds

Status trap: disabled

Dynamic QoS Configuration

-------------------------

DQoS is enabled

T0 Timer: 30 seconds

T1 Timer: 60 seconds

Resource Request trap: disabled

Emergency trap: disabled

PacketCable Configuration	display the cable (CMTS) interface
	IP address.
COPS Configuration	display the PEP ID, Client Timer,
	and if the Status SNMP trap is
	enabled or disabled.
PDP IP Address	display the Policy Decision Point
	(PDP) for one or more Call
	Management Servers (PacketCable
	architecture).

16-46 MGBI 526363-001-00 Rev. B