HP CQ62z-300, CQ62-238DX, CQ62-231NR, CQ62-225NR, CQ62-220US System Configuration menu, Language

Enable/disable LAN power saving mode. Enable/disable SATA Native Mode. Enable/disable Dual Core CPU. Enable/disable HDD translation mode.

System Configuration menu

NOTE: Some of the listed System Configuration options might not be supported by the computer.

Select	To do this
Language	Change the Computer Setup language.
Boot options	● Set an f9, f10, and f12 delay when starting up.
	● Enable/disable CD-ROM boot.
	● Enable/disable floppy boot.
	● Enable/disable internal network adapter boot.
	● Enable/disable MultiBoot, which sets a boot order that
	can include most boot devices in the system.
	● Set the Express Boot Popup delay in seconds.
	● Set the boot order.
	◦	1st boot device—USB CD-ROM
	◦	2nd boot device—USB floppy
	◦	3rd boot device—USB SuperDisk
	◦	4th boot device—Notebook hard drive
	◦	5th boot device—USB hard disk
	◦	6th boot device—Network controller
Device Configurations	● Swap the functions of the fn key and left ctrl key.
	● Enable/disable USB legacy support. When enabled,
	USB legacy support allows the following:
	◦	Use of a USB keyboard in Computer Setup even
		when the operating system is not running.
	◦	Startup from bootable USB devices, including a
		hard drive, diskette drive, or optical drive
		connected by a USB port to the computer.

● Enable/disable BIOS DMA data transfers.

● Enable/disable fan always on while connected to an AC outlet.

● Enable/disable data execution prevention.

●

●

●

●

98 Chapter 5 Setup Utility ENWW