Directed Audio XTR5004 Signal Input and Output Configurations, Input Gain, Crossover Switch

Models: XTR5004 XTR2504

1 102
Download 102 pages 6.33 Kb
Page 7
Image 7

Amplifier Settings

Signal Input and Output Configurations

The input section of the amplifier consists of gain controls, high pass and low pass crossovers controls, Bass Boost control and RCA inputs and outputs.. The input section makes it easy to adapt this amplifier to most system configurations..

frequencies higher than recommended will not cause damage and may provide superior sonic results depending on your system’s perfor- mance goals.. Refer to your loudspeaker owner’s manual for assistance in choosing the proper crossover frequencies for your system..

WARNING! DO NOT set crossover frequencies lower than the speakers recommended operating range.. This can cause driver failure that is not covered by the manufacturer’s warranty..

Input Gain

These Orion amplifiers have level adjustments to allow for easy inte- gration with any source unit.. The input sensitivity can be adjusted from 200mV to 8V.. Refer to Testing the System and Adjusting the Sound of the System sections of this guide for detailed instructions on setting the gain..

Line Output Configurations

The line outputs on Orion amplifiers offer easy system expansion and can be used to route signal from the RCA line outputs to the next Orion amplifier’s RCA line inputs in the signal chain..

Internal Crossover Configurations, Flat (full range)

The crossover section of the Orion XTR2504 and XTR5004 amplifiers are continuously variable and extremely flexible..

When using Orion loudspeakers, minor deviations from the recom- mended frequency ranges can provide superior results depending on your speaker locations and your vehicle acoustics.. Setting crossover

Crossover Switch

Controls the type of filter for the onboard active crossover.. The Orion XTR2504 and XTR5004 have a switch for the selectable crossover..

Full position does not attenuate any frequencies and is for full range speaker systems..

High attenuates low frequencies and is used for mid-range speak- ers and tweeters..

Low attenuates high frequencies and is used for subwoofer speakers..

Low-Pass Crossover

When the switch is to the center (FULL position), the low-pass cross- over is bypassed.. When the switch is to the left, the low-pass crossover is active.. The low-pass crossover is continuously variable from 50Hz to 2000Hz..

© 2008 Directed Electronics. All rights reserved.

6

Page 7
Image 7
Directed Audio XTR5004 Signal Input and Output Configurations, Input Gain, Line Output Configurations, Crossover Switch

XTR5004, XTR2504 specifications

The Directed Audio XTR2504 and XTR5004 are premium amplifiers designed for audio enthusiasts seeking an exceptional listening experience. These models are part of Directed's XTR line, which is known for its innovative technology and high performance, catering to both car audio and home audio applications.

One of the main features of the XTR2504 is its compact design, which allows it to fit in a variety of installation locations without compromising on power. The amplifier is rated at 250 watts RMS, providing ample power to drive mid-range and high-frequency speakers. It boasts a 4-channel output configuration, making it suitable for multi-speaker setups and offering flexibility for system customization.

The XTR5004 takes performance a step further, delivering an impressive 500 watts RMS. This model is ideal for larger setups or for users who require additional power to energize larger speakers and subwoofers. Both models utilize high-efficiency class D amplification technology, which minimizes power consumption while maximizing output. This efficiency translates to less heat generation, allowing for prolonged use without the risk of overheating.

One of the standout technologies featured in these amplifiers is their advanced signal processing capabilities. Both the XTR2504 and XTR5004 come equipped with variable high-pass and low-pass filters, allowing users to tailor the output frequency range according to their specific needs. This feature is crucial for optimizing sound quality, ensuring that each speaker operates within its optimal range, leading to a clearer and more balanced audio experience.

The amplifiers also incorporate a robust thermal management system, including built-in protection mechanisms that prevent damage from overheating or short circuits. This attention to durability and reliability makes the XTR2504 and XTR5004 ideal choices for both competitive audio setups and casual listening environments.

Additional characteristics include a sleek, modern design featuring a durable chassis that can withstand the rigors of installation in car environments. The amplifiers feature high-quality RCA inputs and remote gain control options for user convenience.

In summary, the Directed Audio XTR2504 and XTR5004 amplifiers exemplify cutting-edge technology in the realm of audio performance. With their powerful output, efficient design, and customizable features, these models are designed to provide an immersive audio experience that will satisfy even the most discerning audiophiles.