•Reverse Polarity: Any instance when the battery polarity or wires from the battery to the amplifier are reversed.. .
Thermal LED: This LED lights up red if the amplifier overheats.. An amplifier can thermal many different ways and below is a description of reasons the amplifier could engage the Thermal Circuit..
•Speaker loads lower than the amplifiers minimum impedance load will cause the amplifier to draw more current and may result in overheating.. This can be avoided by using speakers or wiring methods that result in an impedance load greater than the amplifiers minimum impedance load capability..
•The amplifier can also overheat if it is not receiving proper ventilation, when mounting a amplifier make sure it has room for air to circulate and keep it cool.. Amplifiers will get hot because they produce energy and care and consideration should be taken into account when installing any amplifier..
•The temperature inside the car where the amplifier is mounted is extremely hot.. This can occur in desert climates.. It is not uncommon for temperatures inside a parked car to reach in excess of 140°F (60°C).. If airflow is restricted to the mounting area, the main car cabin may cool down before the rest of the car has dropped appreciably..
Amplifier Top Plate
Power Thermal
Protection
Figure 14
Figura 14
Abbildung 14
© 2008 Directed Electronics. All rights reserved. | 17 |
