
Release 1.0 | RIP Commands |
|
|
ip rip receive version
The ip rip receive version command configures an interface to only receive packets from a specific version of the RIP protocol. Use the ip rip receive version command to configure the interface to receive one or both RIP versions. The no ip rip receive version command resets the RIP protocol version to RIP version 1 and 2.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip rip receive version {0, 1, 2} no ip rip receive version {0, 1, 2}
Command Syntax
0 | RIP version 1 and 2 |
1 | RIP version 1 only |
2 | RIP version 2 only |
Command Default
0
MGBI |