Release 1.0 | CMTS Commands |
|
|
show cable modem cpe
The show cable modem cpe command displays the following Customer Premises Equipment (CPE) information for all cable interfaces, a particular upstream port, or a specific CPE:
Interface | the downstream cable interface and upstream |
| port the cable modem is connected to |
PSID | the upstream Primary SID number associated |
| with this cable modem |
CM MAC | the cable modem’s MAC address |
CM IP | the cable modem’s IP address |
CPE MAC | the MAC address of a CPE device connected |
| to the cable modem displayed in the |
| command output |
CPE IP | the IP address of a CPE device connected to |
| the cable modem displayed in the command |
| output |
Count | the CPE count per cable modem |
The following is an example of typical screen output from the show cable modem cpe command:
Interface |
| Prim | Connect | Timing | Rec | Ip Address | Mac Address |
|
| Sid | State | Offset | Power |
|
|
Cable 4/1/D1U1 | 2 | online(pt) | 578 | 0.3 | 150.31.101.15 | 000b.0643.3bb2 | |
Number of | Hosts | = 0 |
|
|
|
|
|
Group Access
All
Command Mode
All modes except User EXEC
MGBI |
