Release 1.0 | CMTS Commands |
|
|
dhcp throttle window
The dhcp throttle window command configures the rate of one DHCP Request/ Discover packet per number of seconds for a CM or CPE. The no dhcp throttle window command restores the DHCP Request/Discover packet rate per number of seconds to the default value for all CMs or CPEs.
Note: DHCP Rate Limiting must be enabled with the dhcp throttle on command for a new DHCP Request/Discover packet rate limit setting (other than the default) to take effect.
Group Access
All
Command Mode
Interface Configuration (cable interface only)
Command Line Usage
dhcp throttle {cm cpe} window
Command Syntax
cm | configure a DHCP packet rate limit per |
| millisecond for all CMs. |
cpe | configure a DHCP packet rate limit per |
| millisecond for all CPEs. |
the number of milliseconds for each DHCP | |
| Request/Discover packet |
Command Default
one DHCP Request packet every 5000 milliseconds (five seconds)
MGBI |
