Motorola BSR 2000 manual Show cable modem svc-flow-id, Begin

BSR 2000 Command Reference Guide Release 1.0

show cable modem svc-flow-id

The show cable modem svc-flow-idcommand displays the following information for all of the service flows associated with a specific MAC address:

Service flow id			the service flow identifier number
Interface			cable modem interface with active
			connection
Flow Direction			the flow direction for this service flow
Flow Max Rate			the maximum sustained traffic rate
			allowed for this service flow in bits/sec -
			no traffic rate limit for this service flow is
			indicated by "no restriction"
The following is typical output from the show cable modem svc-flow-idcommand:
Service flow id	Interface		Flow Direction	Flow Max Rate
9	cable	0/1	Upstream	96000
10	cable	0/1	Downstream	10

Command Mode

All modes except User EXEC

Command Line Usage

show cable modem <mac> svc-flow-id [ {begin exclude include} {<WORD>} [ {count count-only}]]

show cable modem <mac> svc-flow-id [ {count count-only}]

Command Syntax

mac	cable modem Media Access Control layer address
	turns on output modifiers (filters)
begin	filter for output that begins with the specified string
exclude	filter for output that excludes the specified string
include	filter for output that includes the specified string

11-204 MGBI 526363-001-00 Rev. B