Release 1.0 | CMTS Commands |
|
|
cable upstream concatenation
The cable upstream concatenation command enables CMTS concatenation capabilities. The no cable upstream concatenation command disables CMTS concatenation capabilities.
Note: Concatenation must be enabled globally with the cable upstream concatenation command before any setting specified with the cable concatenation command is valid. Once concatenation is enabled globally, the cable concatenation command will enable or disable concatentation for DOCSIS 1.0 and 1.1 cable modems only and concatenation will always be enabled for DOCSIS 2.0 cable modems regardless of any setting specified with this command.
Group Access
MSO
Command Mode
Interface Configuration (cable interface only)
Command Line Usage
cable upstream <NUM> concatenation no cable upstream <NUM> concatenation
Command Syntax
NUM | the upstream port number |
Command Default
Enabled
MGBI |
