Release 1.0 | CMTS Commands |
|
|
snr display
The snr display command displays SNR measurement data to a console or telnet session. SNR measurement data is retrieved either from an operational CMTS module or a file system.
Group Access
MSO
Command Mode
Privileged EXEC
Command Line Usage
snr display {<NUM>{<NUM>}} flash:<filename> <WORD> loop-data
{<NUM>{<NUM>}} nvram:<filename> <WORD>}
Command Syntax
NUM | This number is always 0 for the BSR 2000. |
NUM | valid upstream port number |
flash:<filename> | retrieve the SNR measurement data from the |
| Flash file system |
| displays SNR loop measurement data |
nvram:<filename> | retrieve the SNR measurement data from the |
| NVRAM file system |
WORD | SNR measurement data filename - limit of 20 |
| characters excluding the ".snr" filename |
| extension |
MGBI |