Release 1.0

CMTS Commands

 

 

cable dhcp-giaddr primary

This cable dhcp-giaddr primary command forces the BSR to always set the giaddr in host DHCP requests to the primary cable interface IP address.

The no cable dhcp-giaddr primary command sets the giaddr field in DHCP host requests to the default. When set to the default, the first secondary address, if one is defined, is used in DHCP host requests, otherwise the primary IP address is used.

Group Access

ISP

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable dhcp-giaddr primary no cable dhcp-giaddr primary

Command Default

The giaddr for cable modems is the primary IP address on the cable interface. The giaddr for Hosts is the first secondary IP address on the cable interface.

526363-001-00 Rev. B

MGBI

11-7

Page 553
Image 553
Motorola BSR 2000 manual Cable dhcp-giaddr primary no cable dhcp-giaddr primary