REMOTE AND INDOOR TEMPERATURES
The remote temperature information is located on the middle line of the main unit’s display. The indoor temperature with the icon IN is located next to the remote temperature.
The wave icon above the remote channel number indicates the reception status from the remote temperature sensor.
There are three following types of the reception status that may be displayed:
The unit is in searching |
|
mode. |
|
Temperature readings are |
|
securely registered. |
|
No signals detected. | - - - |
NOTE: If the indoor or remote temperature goes above or below operating range stated in specifications, the main unit’s display will show dashes “- -
AUTO-SCANNING
Press and hold the CHANNEL button on the back on the main unit for 2 seconds – the icon “3” will appear on the display’s middle line below the remote temperature channel number. All 3 remote temperatures will be displayed
To exit from scanning mode, press and hold the CHANNEL button (on the back) for 2 seconds, and the icon “3” will disappear, returning the main unit to the default display mode.
17
CHECKING REMOTE RAINFALL DATA
The remote rainfall information line is located on the top line of the main unit’s display.
The rain icon 
is located to the left of the rainfall reading and indicates the reception status from the remote rain gauge.
There are three following types of the reception status that may be displayed:
The unit is in searching |
|
mode. |
|
Rainfall readings are |
|
securely registered. |
|
No signals detected. | - - - |
Press and hold the MODE button on the front panel to display the rainfall reading in inches or mm.
RAINFALL HISTORY
The rainfall history records will be automatically stored in the memory of the main unit. There are three historical records may be displayed – for the past hour, past day and past week.
To display any of available rainfall history reading, use any button on the front panel except the ALARM button. The display sequence is: LAST HOUR, LAST 24 HOURS, and LAST 7 DAYS.
To clear the memory, press and hold MEMORY button on the front panel for two seconds and all previously stored readings will be erased (all the historical records will display a default reading 0.00).
1718
