Nortel Networks manual Installing the Passport 8672ATME Module, Removing the filler panel

Chapter 3 Installing the Passport 8672ATME Module 39

Installing the Passport 8672ATME Module

To install the Passport 8672ATME Module:

1Remove the filler panel from the module slot in the Passport 8600 series chassis (Figure 5).

Figure 5 Removing the filler panel

9058FB

2Make sure the inserter/extractor levers are extended away from the Passport 8672ATME Module front panel (Figure 6).

Figure 6 Extending the inserter/extractor levers

.

9059FA

Note: Always handle an I/O module by the sides and carefully slide it out of the chassis. Place the module on a grounded work surface and in an antistatic bag for storage.

Using the Passport 8672ATME Module