Nortel Networks 8672ATME manual Configuring an ATM 1483 PVC

Chapter 6 Configuring the Passport 8672ATME Module 125

5Click OK.

The VlanPortMembers dialog box closes and the VLAN, Insert Basic dialog is redisplayed.

6Click Close.

Configuring an ATM 1483 PVC

To configure an ATM 1483 PVC:

1From the Device Manager menu bar, choose Edit > ATM.

The port dialog box opens with the ATM tab displayed (Figure 25). Table 8 on page 59 describes the ATM tab fields.

2Click the ATM PVC tab.

The ATM PVC tab opens (Figure 17 on page 61). Table 9 on page 61 describes the ATM PVC tab fields.

3Click Insert.

The ATM, Insert ATM dialog box opens (Figure 18 on page 62). Table 10 on page 62 describes the ATM, Insert ATM tab fields.

4Do the following:

a In the Port field, click the button to view ports. b Select the port.

c In the Vpi field, type the VPI value based on the VPI bit set in the ATM port tag (i.e., if Vpi bit is 4, the VPI range is 0..15).

d In the Vci field, type the VCI value based on the VPI bit set in the ATM port configuration (see Table 10 on page 62 for Device Manager information or Table on page 81 for CLI information).

e In the Name field, type the name of the ATM PVC card.

f In the Encapsulation field, select the encapsulation method (null or IIcSnap).

g In the Service type field, select the service type (ubr or vbr).

Using the Passport 8672ATME Module