Nortel Networks 8672ATME manual Displaying F5 Loopback statistics, F5 Loopback Stats tab 209195-B

72Chapter 4 Managing the Passport 8672ATME Module with Device Manager

Table 13 F5 Loopback tab field descriptions (continued)

Field	Description
LbUpCount	Enter the number of consecutive end-to-end F5-OAM loopback
	cell responses (1-255) that must be received in order to change a
	PVC connection state to up. The default value is 3 responses.
LbDownCount	Enter the number of consecutive end-to-end F5-OAM loopback
	cell responses (1-255) to be not received in order to change a
	PVC state to down. The default value is 5 responses (not
	received).
TrapEnable	Click to enable or disable OAM traps. When enabled, a trap is
	sent to the management station when rc2kAtmPvcOamVcStatus
	is going up or down.

Displaying F5 Loopback statistics

To display F5 Loopback statistics:

1From the Device Manager menu bar choose Edit > ATM.

The ATM dialog box opens with the ATM PVC tab displayed (Figure 18).

2Highlight a PVC.

3Click F5 Loopback.

The F5 Loopback dialog box opens with the F5 Loopback tab displayed (Figure 26).

4Click the F5 Loopback Stats tab.

The F5 Loopback Stats tab is displayed (Figure 27).

Figure 27 F5 Loopback Stats tab

209195-B