Nortel Networks 8672ATME manual Config atm pvc 1483 command

82Chapter 5 Managing the Passport 8672ATME Module with the CLI

Table 18 config atm pvc command parameters and variables (continued)

delete <vpi.vci>	Deletes the specified PVC. Note that this command will fail if the PVC is
	still being used by RFC 1483 traffic.
info [<ports>]	Displays PVC information.

config atm pvc 1483 command

Use the config atm pvc 1483 commands to configure 1483 parameters on the Passport 8672ATME Module. The syntax is:

•config atm <ports> pvc 1483 bridged

•config atm <ports> pvc 1483 ip

•config atm <ports> pvc 1483 ipx

Table 19 describes the parameters and variables for the config atm <ports> pvc 1483 command.

Table 19 config atm pvc 1483 bridged command parameters and variables

Parameters and variables	Description
add <vid> <vpi.vci> [,<vpi.vci>]...	Adds a number of PVCs to the specified 1483 ELAN. The required
	parameters are:
	• vid means VLAN ID number.
	• vpi.vci means circuit VPI number and the circuit VCI numbers,
	respectively; they are separated by a period.
	Note: This command fails if the specified VIDs or VPI/VCI pairs belong
	to another ELAN or already exist on this ELAN.
create <vid> <vpi.vci>	Creates a 1483 ELAN consisting of the specified PVCs. The required
[,<vpi.vci>]...	parameters are:
	• vid means VLAN ID number.
	• vpi.vci means circuit VPI number and the circuit VCI numbers,
	respectively; they are separated by a period.
	Note: This command fails if the specified VIDs or VPI/VCI pairs belong
	to another ELAN or already exist on this ELAN.
delete <vid>	Deletes the specified ELAN.

209195-B