Nortel Networks 8672ATME manual Show commands, Show ports info atm all command

Chapter 5 Managing the Passport 8672ATME Module with the CLI 85

Show commands

This section discusses the CLI show commands available with the

Passport 8672ATME Module. These commands allow you to view information about the module:

show ports info atm all [<ports>] show ports info atm fdb

show ports info atm ports [<ports>] show ports info atm pvc [<ports>] show ports info atm 1483 [<ports>] show ports stats atmport [<ports>]

show ports stats atm felinecurrent [<ports>]

show ports stats atm felineinterval <intervalid> [<ports>] show ports stats atm fepathcurrent [<ports>]

show ports stats atm fepathinterval <intervalid> [<ports>] show ports stats atm linecurrent [<ports>]

show ports stats atm lineinterval <intervalid> [<ports>] show ports stats atm pathcurrent [<ports>]

show ports stats atm pathinterval <intervalid> [<ports>] show ports stats atm sectioncurrent [<ports>]

show ports stats atm sectioninterval <intervalid> [<ports>] show ports stats atm sonetmediumtbl [<ports>]

Refer to Reference for the Passport 8000 Series Command Line Interface Switching Operations, and Reference for the Passport 8000 Series Command Line Interface Routing Operations for a complete list of CLI show commands.

show ports info atm all command

This command displays information (Figure 31) about the configuration for the specified port or for all ports. The command uses the syntax:

show ports info atm all [<ports>]

Using the Passport 8672ATME Module