Nortel Networks 8672ATME manual Configuring an IP routing 1483 PVC using Device Manager

Chapter 6 Configuring the Passport 8672ATME Module 129

Bridging point-to-multipoint traffic using an ATM 1483 PVC using the CLI

To configure two ATM 1483 bridged PVCs using the CLI:

1To create two VLANs by port, enter: config vlan 2 create byport 1

2To add ATM port (1/1) and some Ethernet ports (3/40-3/48) into the VLAN, enter:

config vlan 2 port add 1/1, 3/40-3/48

3To create a 1483 Null-encapsulation UBR PVC, enter

config atm 1/1 pvc create 0.100 ecn 1483-null serv ubr

Or create a 1483 Null-encapsulation VBR PVC.

config atm 1/1 pvc create 0.100 enc 1483-null serv vbr<PCR value>scr<SCR value> mbs<MBS value>

4To associate the two 1483 bridged PVCs with the same VLAN, enter:

config atm 1/1 pvc 1483 bridged create 2 0.100, 0.101

The Passport 8672ATME Module directs the two ATM 1483 bridged PVCs to two different ATM ports on the other end.

Configuring an IP routing 1483 PVC using Device Manager

In the configuration shown in Figure 55, the Passport 8672ATME Module has an ATM 1483 PVC as the sole member of a VLAN configured for IP routing.

Using the Passport 8672ATME Module