Nortel Networks 8672ATME Associating the PVC with the Vlan, ConnectType field, select bridged

126Chapter 6 Configuring the Passport 8672ATME Module

hIf you select vbr in the Service type field, complete these fields:

In the PeakCellRate field, enter the PCR (an integer between 86 and 733490).

In the SustainedCellRate field, enter the SCR (an integer between 86 and 733490).

In the MaxBurstSize field, type the maximum burst size (an integer between 2 and 255).

5Click Insert.

The ATM, Insert ATM dialog box closes, and the ATM PVC tab is redisplayed.

6Click Close.

Associating the PVC with the VLAN

1From the Device Manager menu bar, choose Edit > ATM.

The Port dialog box opens with the ATM tab displayed (Figure 16 on page 59).

Table 8 on page 59 describes the ATM tab items.

2Click the ATM 1483 ELAN tab. The ATM 1483 ELAN tab opens.

3Click Insert.

The Insert ATM 1483 ELAN dialog box opens (Figure 21 on page 66). Table 12 on page 66 describes the Insert ATM 1483 ELAN dialog box fields.

4Do the following:

a In the Port field, click the button to view ports.

b Select the port for which you configured the ATM PVC in “Configuring two ATM 1483 PVCs on the same ATM port” on page 128 .

c In the VlanId field, enter the VLAN Id you created in “Creating a VLAN “byPort” and adding ports” on page 121 .

d In the PvcIds field, enter the value for the PVC IDs you created in “Configuring two ATM 1483 PVCs on the same ATM port” on page 128 .

e In the ConnectType field, select bridged.

209195-B