Nortel Networks 8672ATME Enabling RIP routing, IP, VLAN, Insert IP Address dialog box fields

132Chapter 6 Configuring the Passport 8672ATME Module

Table 46 describes the IP, VLAN, Insert IP Address dialog box fields.

Table 46 IP, VLAN, Insert IP Address dialog box fields

Field	Description
Ip Address	IP address of the VLAN
Net Mask	Subnet mask associated with the IP address of the entry.

5In the IP Address field, type the IP address for the VLAN.

6In the Net Mask field, type the net mask value.

Note: Use different subnets for each IP address.

7Click Insert.

The IP, VLAN, Insert IP Address dialog box closes and the IP, VLAN dialog box is redisplayed.

8Click Close.

Enabling RIP routing

Note: The Passport 8672ATME Module supports only RIP version 2.

1From the Device Manager menu bar, choose VLAN > VLANs.

The VLAN dialog box opens with the Basic tab displayed (Figure 51). Table 42 on page 122 describes the VLAN Basic tab fields.

2Click one of the VLANs.

3Click IP.

The IP, VLAN dialog box opens with the IP Address tab displayed (Figure 56 on page 131).

Table 45 on page 131 describes the IP Address tab fields.

209195-B