Nortel Networks 8672ATME manual Enabling IPX forwarding, IPX VLAN, Insert dialog box fields

140Chapter 6 Configuring the Passport 8672ATME Module

Figure 62 IPX VLAN, Insert dialog box

Table 50 describes the IPX VLAN, Insert dialog box fields.

Table 50 IPX VLAN, Insert dialog box fields

Field	Description
NetAddr	The IP address of this VLAN.
Encap	Encapsulation type: ethernetii, snap, llc, or raw.

5In the NetAddr field, configure the IPX network numbers for the VLAN.

6In the Encap field, click the encapsulation type.

7Click Insert.

The IPX VLAN, Insert dialog box closes, and the IPX tab is redisplayed.

8Click Close.

Enabling IPX forwarding

To enable IPX forwarding on both VLANs:

1From the Device Manager menu bar, choose IPX Routing > IPX. The IPX dialog box opens with the Globals tab displayed (Figure 63).

Figure 63 Globals tab

209195-B