Nortel Networks 8672ATME manual Creating two VLANs byPort, Assigning IP addresses

130 Chapter 6 Configuring the Passport 8672ATME Module

Figure 55 IP routing with ATM 1483 PVCs

Passport

1.x

ATM Switches

ATM VC1

2.x

RFC 1483 Routed PVC

Traditional

Router

ATM VC1

3.x

2.x

9938EB

Note: Each configured ATM 1483 PVC uses one VLAN. The

Passport 8672ATME Module can be configured for a maximum of 256

VLANs per MDA and a maximum of 512 VLANs per card.

This configuration requires the following procedures:

•“Creating a VLAN “byPort” and adding ports” on page 121

•“Assigning IP addresses” on page 130

•“Enabling RIP routing” on page 132

•“Configuring a null-encapsulation PVC” on page 136

•“Associating the PVC with the VLAN” on page 136

Creating two VLANs “byPort”

To create two VLANs “byPort,” see “Creating a VLAN “byPort” and adding ports” on page 121 . One VLAN must have only one ATM port. The second VLAN can have one or multiple Ethernet ports.

Assigning IP addresses

To assign an IP address to both VLANs:

1From the Device Manager menu bar, choose VLAN > VLANs.

The VLAN dialog box opens with the Basic tab displayed (Figure 51 on page 121).

Table 42 on page 122 describes the fields in the VLAN Basic tab.

2Click one of the VLANs.

209195-B