Describes the ATM 1483 Elan tab fields | Nortel Networks 8672ATME

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 65

Table 11 describes the ATM 1483 ELAN tab fields.

Table 11 ATM 1483 ELAN tab fields

Field	Description

VlanId	VLAN to which the ELAN belongs.

ElanId	Internal ID of the ELAN.

NumPvcIds	Number of PVCs pairs used in the ELAN.

PvcIds	List of PVC IDs, minimum of 1 required.

ConnectType	Type of connection: bridged, IP or IPX.

VlanMacAddress	MAC address assigned to this VLAN: used in IP and IPX
	routed circuits when there is no appropriate destination
	MAC to use.

DummyMacAddress	Dummy MAC address assigned to this VLAN: used in IP
	and IPX routed circuits when there is no appropriate source
	MAC to use.

LocalIpAddress	Local IP address for connection type IP.

RemoteIpAddress	Remote IP address for connection type IP.

InArpSendEnable	Enables ARP sending on the ELAN for connection type IP.

InArpSendInterval	Interval of ARP sending for connection type IP.

IpxVlanEncapMethod	One of the following:
	•	llc
	•	snap
	•	ether-ii
	•	raw

IpxNetworkNum	Network number; IPX only.

StgId	Spanning tree group ID. Only for bridge connection type.

rcStgTaggedBpduVlanId		VLAN ID used for tagging BPDUs.

4Click Insert.

The Insert ATM 1483 ELAN dialog box opens (Figure 21).

Using the Passport 8672ATME Module

Image 65

Nortel Networks 8672ATME Describes the ATM 1483 Elan tab fields, Click Insert Insert ATM 1483 Elan dialog box opens Figure

Contents

Using the Passport 8672ATME Module Trademarks Copyright 2001 Nortel NetworksStatement of conditions USA requirements only Japan/Nippon requirements only Using the Passport 8672ATME ModuleTaiwan requirements Canada requirements only Nortel Networks Inc. software license agreement General 209195-B Contents Contents Chapter Installing the Passport 8672ATME Module Chapter Managing the Passport 8672ATME Module With the CLI Chapter Configuring the Passport 8672ATME Module Configuring an IPX routing 1483 PVC using the CLI Contents 209195-B Figures Figures Using the Passport 8672ATME Module Figures 209195-B Tables Tables Before you begin Preface Text conventions Italic text Related publications Preface Preface Technical Solutions Center Telephone How to get help Chapter About the Passport 8672ATME Module About the Passport 8672ATME Module Features Traffic shaping ATM ELANs, and Ethernet VLANsVirtual network router RFC 1483 Support Physical description Passport 8672ATM module Media dependent adapters Port OC-3c/STM-1 MDA Online LED Lists the Passport 8672ATME Module online LED indications MDA LEDsLists the MDA LED indications MDA LED indications Console and Diag ports This chapter contains the following information ATM terms and acronyms Passport 8672ATME Module terminology Sonet terms and acronyms Sonet transmission rates Safety and environmental precautions Chapter Installing the Passport 8672ATME Module Installing the Passport 8672ATME Module Removing the filler panel Installing the Passport 8672ATME Module Inserting the Passport 8672ATME Module Tighten the retaining screws Figure Verifying installation Initialization Unsuccessful download screen output MDA insertion and configuration Replacing a module Starting the system with an empty slot Starting the system after a module replacement Port numbering Managing the Passport 8672ATME Module with Device Manager Device Manager Installing Device Manager Device Manager access and passwords Device Manager port color codes Passport 8000 series chassis with Passport 8672ATME Module Device Manager buttons Configuring and managing ATM Interface tab-ATM 209195-B Changing default settings ATM Interface tab fields Describes the Interface tab fields Resetting the module ATM Describes the Card tab fieldsCard tab fields Click the ATM tab ATM tab opens Figure Click reset Click ApplyViewing MDA information MDA dialog box fields Enabling or disabling a portDescribes the MDA dialog box fields Editing ATM and framing parameters Editing port parameters ATM tab fields Describes the ATM tab fields Editing circuit parameters ATM PVC tab fields Describes the ATM PVC tab fields Insert ATM PVC dialog box fields Click Insert Insert ATM PVC dialog box opens FigureDescribes the Port, Insert ATM PVC dialog box fields Deleting a PVC Click Delete PVC is deleted Configuring ATM 1483 Elan parameters ATM 1483 Elan tab fields Describes the ATM 1483 Elan tab fieldsClick Insert Insert ATM 1483 Elan dialog box opens Figure Vlan ID Describes the Insert ATM 1483 Elan dialog box fieldsPort, Insert ATM 1483 Elan dialog box fields Shows the relevant fields for IP routing Shows the relevant fields for IPX routing Insert ATM 1483 Elan dialog box for IPX routing Deleting an ATM 1483 Elan Click Delete ATM 1483 Elan is deleted Configuring ATM F5-OAM End-to-End LoopbackEnabling and defining ATM F5-OAM parameters F5 Loopback tab field descriptions Describes the F5 Loopback tab fields F5 Loopback Stats tab 209195-B Displaying F5 Loopback statistics Testing using Device Manager Displaying statistics using Device ManagerTesting is not supported in this release Describes the fields in the F5 Loopback Stats tabPage This chapter contains the following topics Chapter Managing the Passport 8672ATME Module with the CLI Managing the Passport 8672ATME Module with the CLI Configuration commandsModule commands Clear atm elan-stats vlan id Config atmcard elan-statsElan statistics Show atm elan-stats vlan id Information fields for the show atm elan-stats command Clear atm elan-stats Port commands Config atm command parameters and variables Config atm command Config atm pvc command parameters and variables Config atm pvc command Config atm pvc 1483 bridged command parameters and variables Config atm pvc 1483 command Config atm pvc 1483 ip command parameters and variables Sample output for the config atm info command Config atm info command Show ports info atm all command Show commands Show ports info atm all command output Information fields for the show ports info atm all command Show ports info atm fdb command AGE Time Show ports info atm ports commandInformation fields for the show ports info atm fdb command Show ports info atm ports command output Show ports info atm pvc ports Show ports info atm pvc command Information fields for the show ports info atm pvc command Information fields for the show ports info atm 1483 command Show ports info atm 1483 command Show ports stats atmport command Information fields for the show ports stats atmport command Show ports stats atm felinecurrent Severely Errored Errored SecondsCount ES Count SES Show ports stats atm felineinterval Show ports stats atm felineinterval command output UAS Interval ID Show ports stats atm fepathcurrent UAS Show ports stats atm fepathinterval Show ports stats atm fepathinterval command output Show ports stats atm linecurrent Show ports stats atm linecurrent command output UAS Status Show ports stats atm lineinterval Show ports stats atm pathcurrent Severely Erred Count Erred Secs Count ESSES UAS Statuswidth Show ports stats atm pathinterval Show ports stats atm pathinterval command output Show ports stats atm sectioncurrent Show ports stats atm sectioncurrent command output Frames SEF Status Show ports stats atm sectioninterval Frames SEF Show ports stats atm sectioninterval command output Medium Type Show ports stats atm sonetmediumtbl Valid Intervals Time ElapsedLine Coding Line Type F5-OAM Loopback parameters Config atm pvc f5-oam command Show ports info atm pvc slot/port Show ports info atm f5-oam slot/port Status and statistic definition Clear atm f5-oam slot/port Displaying packet loss counters Initial configuration Chapter Configuring the Passport 8672ATME Module Configuring the Passport 8672ATME Module Changing the clock setting using Device Manager To change the clock setting using the CLI, enter Changing the clock setting using the CLI Basic configuration procedures Creating a Vlan byPort and adding ports Point-to-point bridging using 1483 PVCs Click Insert VLAN, Insert Basic dialog box opens Figure Describes the Basic tab fieldsBasic tab fields Vlan VLAN, Insert Basic dialog box fields Describes the VLAN, Insert Basic dialog box fields VlanPortMembers dialog box fields Describes the VlanPortMembers dialog box fieldsClick port numbers to add ports to the Vlan Configuring an ATM 1483 PVC ConnectType field, select bridged Associating the PVC with the Vlan To associate the ATM 1483 bridged PVC with a VLAN, enter Associating the PVCs with the same Vlan Configuring two ATM 1483 PVCs on the same ATM portThis configuration requires the following procedures To configure two ATM 1483 bridged PVCs using the CLI Configuring an IP routing 1483 PVC using Device ManagerTo create a 1483 Null-encapsulation UBR PVC, enter Or create a 1483 Null-encapsulation VBR PVC Assigning IP addresses Creating two VLANs byPort IP Address tab Describes the IP Address tab fields IP, VLAN, Insert IP Address dialog box fields Enabling RIP routingDescribes the IP, VLAN, Insert IP Address dialog box fields RIP tab fields Click the RIP tab RIP tab opens FigureDescribes the RIP tab fields Enabling Ospf routing Configuring the Passport 8672ATME Module RIP tab fields Ospf tab fields Describes the Ospf tab fields Configuring a null-encapsulation PVC Configuring an IP routing 1483 PVC using the CLIConfiguring the Passport 8672ATME Module Ospf tab fields Associating the PVC with the Vlan To associate the 1483 IP routed PVC with a VLAN, enter Configuring an IPX routing 1483 PVC using Device Manager IPX routing with ATM 1483 PVCs Describes the IPX Vlan dialog box fields Configuring IPX network numbersClick Insert IPX VLAN, Insert dialog box opens Figure IPX Vlan dialog box fields IPX VLAN, Insert dialog box fields Enabling IPX forwardingDescribes the IPX VLAN, Insert dialog box fields Enabling IPX network number forwarding Click RoutingEnable Click Apply Click CloseDescribes the Globals tab item Globals tab item Circuits tab fields Describes the Circuits tab fields To associate a 1483 IPX routed PVC with a VLAN, enter Configuring an IPX routing 1483 PVC using the CLITo enable forwarding on IPX, enter Configuring the Passport 8672ATME Module 209195-B Chapter Web Management Passport 8672ATME Module Describes the fields displayed in the SystemWeb Management System page fields ATM menu PVC page items Describes the fields displayed in the PVCPCR VBR 1483 Elan page, left section 1483 Elan page items Describes the fields displayed in the 1483 Elan Port page items Describes the fields displayed in the Port Web Management Port page items Appendix a Technical Specifications Safety agency approvals Appendix a Technical Specifications Factory default settings for the Passport 8672ATME Module For more information on factory defaults, refer toSonet LLC-SNAP Appendix B Factory defaults 209195-B Index Index Index Index Index Vrrp