Nortel Networks 8672ATME manual Device Manager access and passwords, Installing Device Manager

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 49

For detailed information on all aspects of installing and running Device Manager, refer to:

•Getting Started with the Passport 8000 Series Switch Management Software

•Configuring Switching and Routing Operations for the Passport 8000 Series Switch Using Device Manager Release 5.x.x

The following sections describe the Device Manager features that are specific to the Passport 8672ATME Module:

•“Installing Device Manager ,” next

•“Configuring and managing ATM” on page 51

•“Configuring ATM F5-OAM End-to-End Loopback” on page 70

•“Displaying statistics using Device Manager” on page 73

•“Testing using Device Manager” on page 73

Device Manager access and passwords

For a complete discussion of Passport access levels and passwords, refer to Configuring Switching and Routing Operations for the Passport 8000 Series Switch Using Device Manager Release 5.x.x.

Installing Device Manager

To install Device Manager:

1Download the Device Manager software from the CD.

2Double-click the icon and follow the instructions on the screen.

When you launch Device Manager, a graphical image of the Passport 8600 chassis with the Passport 8672ATME Module installed is displayed (Figure 11).

Using the Passport 8672ATME Module