Nortel Networks 8672ATME manual Show ports info atm pvc command, Show ports info atm pvc ports

Chapter 5 Managing the Passport 8672ATME Module with the CLI 91

Table 24 Information fields for the show ports info atm ports command (continued)

Field	Description
MAX-BITS VCI	This field is read only. It takes remaining bits from
	NumVpiBits. For example, if NumVpiBits is 3 for OC-3c,
	then NumVciBits is 8.
CLOCK SOURCE	Indicates whether the Clock Source is either:
	•	line
	•	internal
LOOPBACK MODE	Indicates the loopback mode:
	•	off
	•	internal
	•	external
ADMIN STATE	Indicates the Admin State of the port, either:
	•	up
	•	down
STATUS	Indicates the status of the port, either:
	•	up
	•	down

show ports info atm pvc command

This command displays information (Figure 33) about the permanent virtual circuits (PVCs) for the specified port or for all ports. The command uses the syntax:

show ports info atm pvc [<ports>]

Using the Passport 8672ATME Module