Nortel Networks 8672ATME manual Describes the Ospf tab fields

Chapter 6 Configuring the Passport 8672ATME Module 135

Figure 59 OSPF tab

Table 48 describes the OSPF tab fields.

Table 48 OSPF tab fields

Field	Description
Enable	Enables or disables OSPF routing on the specified interface
HelloInterval	Length of time, in seconds, between the Hello packets that the
	router sends on the interface. This value must be the same for
	all routers attached to a common network.
RtrDeadInterval	Number of seconds that a router’s Hello packets have not been
	seen before its neighbors declare the router down.
DesigRtrPriority	Priority of this interface. Used in multi-access networks, this
	field is used in the designated router election algorithm. The
	value 0 signifies that the router is not eligible to become the
	designated router on this particular network.
Metric	Metric for this type of service (TOS) on this interface. The
	default value of the TOS 0 Metric is (10^9 / ifSpeed). The value
	FFFF means “no route via this TOS.”
AuthType	Authentication type specified for an interface. Additional
	authentication types may be assigned locally.

Using the Passport 8672ATME Module