Testing using Device Manager | Nortel Networks 8672ATME specs

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 73

Table 14 describes the fields in the F5 Loopback Stats tab.

Table 14 F5 Loopback Stats tab fields

Field	Description

VcStatus	This field indicates the status of the PVC link.
	• notManaged—VC is not being managed by OAM
	• Down Verify—An OAM loopback failed. End-to-end F5-OAM
	loopback cells are sent at the specified retry frequency to verify
	that the VC is down. After down-count unsuccessful retries,
	the VC goes to the down state (see LbDownCount in Table 13).
	• Down—VC has not received responses to end-to-end F5-OAM
	loopback cells.
	• Up Verify—An OAM loopback was successful. End-to-end
	F5-OAM loopback cells are sent at the specified retry
	frequency to verify the VC is really up. After up-count
	successive and successful loopback retries, the VC goes to the
	Up state (see LbUpCount in Table 13).
	• Up—End-to-end loopbacks are successful.

LbRequestSent	Number of OAM loopback requests sent.

LbReplyReceive	Number of OAM loopback replies sent.

LbReplySent	Number of OAM loopback replies received.

Displaying statistics using Device Manager

Statistics are not supported in Device Manager in this release. See the “show ports stats atmport command” on page 94 for information on statistics in the CLI.

Testing using Device Manager

Testing is not supported in this release.

Using the Passport 8672ATME Module

Image 73

Nortel Networks 8672ATME manual Displaying statistics using Device Manager, Testing using Device Manager

Contents

Using the Passport 8672ATME Module Trademarks Copyright 2001 Nortel NetworksStatement of conditions USA requirements only Japan/Nippon requirements only Using the Passport 8672ATME ModuleTaiwan requirements Canada requirements only Nortel Networks Inc. software license agreement General 209195-B Contents Contents Chapter Installing the Passport 8672ATME Module Chapter Managing the Passport 8672ATME Module With the CLI Chapter Configuring the Passport 8672ATME Module Configuring an IPX routing 1483 PVC using the CLI Contents 209195-B Figures Figures Using the Passport 8672ATME Module Figures 209195-B Tables Tables Before you begin Preface Text conventions Italic text Related publications Preface Preface Technical Solutions Center Telephone How to get help Chapter About the Passport 8672ATME Module About the Passport 8672ATME Module Features Virtual network router ATM ELANs, and Ethernet VLANsTraffic shaping RFC 1483 Support Physical description Passport 8672ATM module Media dependent adapters Port OC-3c/STM-1 MDA Online LED Lists the Passport 8672ATME Module online LED indications MDA LEDsLists the MDA LED indications MDA LED indications Console and Diag ports This chapter contains the following information ATM terms and acronyms Passport 8672ATME Module terminology Sonet terms and acronyms Sonet transmission rates Safety and environmental precautions Chapter Installing the Passport 8672ATME Module Installing the Passport 8672ATME Module Removing the filler panel Installing the Passport 8672ATME Module Inserting the Passport 8672ATME Module Tighten the retaining screws Figure Verifying installation Initialization Unsuccessful download screen output MDA insertion and configuration Replacing a module Starting the system with an empty slot Starting the system after a module replacement Port numbering Managing the Passport 8672ATME Module with Device Manager Device Manager Installing Device Manager Device Manager access and passwords Device Manager port color codes Passport 8000 series chassis with Passport 8672ATME Module Device Manager buttons Configuring and managing ATM Interface tab-ATM 209195-B Changing default settings ATM Interface tab fields Describes the Interface tab fields Resetting the module Card tab fields Describes the Card tab fieldsATM Viewing MDA information Click reset Click ApplyClick the ATM tab ATM tab opens Figure Describes the MDA dialog box fields Enabling or disabling a portMDA dialog box fields Editing ATM and framing parameters Editing port parameters ATM tab fields Describes the ATM tab fields Editing circuit parameters ATM PVC tab fields Describes the ATM PVC tab fields Describes the Port, Insert ATM PVC dialog box fields Click Insert Insert ATM PVC dialog box opens FigureInsert ATM PVC dialog box fields Deleting a PVC Click Delete PVC is deleted Configuring ATM 1483 Elan parameters Click Insert Insert ATM 1483 Elan dialog box opens Figure Describes the ATM 1483 Elan tab fieldsATM 1483 Elan tab fields Port, Insert ATM 1483 Elan dialog box fields Describes the Insert ATM 1483 Elan dialog box fieldsVlan ID Shows the relevant fields for IP routing Shows the relevant fields for IPX routing Insert ATM 1483 Elan dialog box for IPX routing Deleting an ATM 1483 Elan Enabling and defining ATM F5-OAM parameters Configuring ATM F5-OAM End-to-End LoopbackClick Delete ATM 1483 Elan is deleted F5 Loopback tab field descriptions Describes the F5 Loopback tab fields F5 Loopback Stats tab 209195-B Displaying F5 Loopback statistics Testing using Device Manager Displaying statistics using Device ManagerTesting is not supported in this release Describes the fields in the F5 Loopback Stats tabPage This chapter contains the following topics Chapter Managing the Passport 8672ATME Module with the CLI Module commands Configuration commandsManaging the Passport 8672ATME Module with the CLI Elan statistics Config atmcard elan-statsClear atm elan-stats vlan id Show atm elan-stats vlan id Information fields for the show atm elan-stats command Clear atm elan-stats Port commands Config atm command parameters and variables Config atm command Config atm pvc command parameters and variables Config atm pvc command Config atm pvc 1483 bridged command parameters and variables Config atm pvc 1483 command Config atm pvc 1483 ip command parameters and variables Sample output for the config atm info command Config atm info command Show ports info atm all command Show commands Show ports info atm all command output Information fields for the show ports info atm all command Show ports info atm fdb command Information fields for the show ports info atm fdb command Show ports info atm ports commandAGE Time Show ports info atm ports command output Show ports info atm pvc ports Show ports info atm pvc command Information fields for the show ports info atm pvc command Information fields for the show ports info atm 1483 command Show ports info atm 1483 command Show ports stats atmport command Information fields for the show ports stats atmport command Show ports stats atm felinecurrent Severely Errored Errored SecondsCount ES Count SES Show ports stats atm felineinterval Show ports stats atm felineinterval command output UAS Interval ID Show ports stats atm fepathcurrent UAS Show ports stats atm fepathinterval Show ports stats atm fepathinterval command output Show ports stats atm linecurrent Show ports stats atm linecurrent command output UAS Status Show ports stats atm lineinterval Show ports stats atm pathcurrent Severely Erred Count Erred Secs Count ESSES UAS Statuswidth Show ports stats atm pathinterval Show ports stats atm pathinterval command output Show ports stats atm sectioncurrent Show ports stats atm sectioncurrent command output Frames SEF Status Show ports stats atm sectioninterval Frames SEF Show ports stats atm sectioninterval command output Medium Type Show ports stats atm sonetmediumtbl Valid Intervals Time ElapsedLine Coding Line Type F5-OAM Loopback parameters Config atm pvc f5-oam command Show ports info atm pvc slot/port Show ports info atm f5-oam slot/port Status and statistic definition Clear atm f5-oam slot/port Displaying packet loss counters Initial configuration Chapter Configuring the Passport 8672ATME Module Configuring the Passport 8672ATME Module Changing the clock setting using Device Manager To change the clock setting using the CLI, enter Changing the clock setting using the CLI Basic configuration procedures Creating a Vlan byPort and adding ports Point-to-point bridging using 1483 PVCs Click Insert VLAN, Insert Basic dialog box opens Figure Describes the Basic tab fieldsBasic tab fields Vlan VLAN, Insert Basic dialog box fields Describes the VLAN, Insert Basic dialog box fields Click port numbers to add ports to the Vlan Describes the VlanPortMembers dialog box fieldsVlanPortMembers dialog box fields Configuring an ATM 1483 PVC ConnectType field, select bridged Associating the PVC with the Vlan To associate the ATM 1483 bridged PVC with a VLAN, enter This configuration requires the following procedures Configuring two ATM 1483 PVCs on the same ATM portAssociating the PVCs with the same Vlan To configure two ATM 1483 bridged PVCs using the CLI Configuring an IP routing 1483 PVC using Device ManagerTo create a 1483 Null-encapsulation UBR PVC, enter Or create a 1483 Null-encapsulation VBR PVC Assigning IP addresses Creating two VLANs byPort IP Address tab Describes the IP Address tab fields Describes the IP, VLAN, Insert IP Address dialog box fields Enabling RIP routingIP, VLAN, Insert IP Address dialog box fields Describes the RIP tab fields Click the RIP tab RIP tab opens FigureRIP tab fields Enabling Ospf routing Configuring the Passport 8672ATME Module RIP tab fields Ospf tab fields Describes the Ospf tab fields Configuring a null-encapsulation PVC Configuring an IP routing 1483 PVC using the CLIConfiguring the Passport 8672ATME Module Ospf tab fields Associating the PVC with the Vlan To associate the 1483 IP routed PVC with a VLAN, enter Configuring an IPX routing 1483 PVC using Device Manager IPX routing with ATM 1483 PVCs Describes the IPX Vlan dialog box fields Configuring IPX network numbersClick Insert IPX VLAN, Insert dialog box opens Figure IPX Vlan dialog box fields Describes the IPX VLAN, Insert dialog box fields Enabling IPX forwardingIPX VLAN, Insert dialog box fields Enabling IPX network number forwarding Click RoutingEnable Click Apply Click CloseDescribes the Globals tab item Globals tab item Circuits tab fields Describes the Circuits tab fields To enable forwarding on IPX, enter Configuring an IPX routing 1483 PVC using the CLITo associate a 1483 IPX routed PVC with a VLAN, enter Configuring the Passport 8672ATME Module 209195-B Chapter Web Management Passport 8672ATME Module Describes the fields displayed in the SystemWeb Management System page fields ATM menu PVC page items Describes the fields displayed in the PVCPCR VBR 1483 Elan page, left section 1483 Elan page items Describes the fields displayed in the 1483 Elan Port page items Describes the fields displayed in the Port Web Management Port page items Appendix a Technical Specifications Safety agency approvals Appendix a Technical Specifications Factory default settings for the Passport 8672ATME Module For more information on factory defaults, refer toSonet LLC-SNAP Appendix B Factory defaults 209195-B Index Index Index Index Index Vrrp