Nortel Networks 8672ATME manual Changing the clock setting using the CLI

Chapter 6 Configuring the Passport 8672ATME Module 119

Figure 49 ATM tab

Table 8 on page 59 describes the ATM tab fields.

4To set the clock setting, in the ClockSource section, click loopTimed or freeRunning.

5Click Apply.

Changing the clock setting using the CLI

To change the clock setting using the CLI, enter:

config atm <ports> clock-source <loop-timedfree-running>

See “config atm command” on page 80 .

Using the Passport 8672ATME Module