Nortel Networks 8672ATME manual Describes the Interface tab fields, ATM Interface tab fields

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 53

Table 5 describes the Interface tab fields.

Table 5 ATM Interface tab fields

Item	Description
Index	Unique value assigned to each interface. The value ranges
	between 16 and 255.
Name	Displays the name of this port. To assign or change a name to
	the port, highlight the field and enter alphanumeric characters.
Descr	Displays the port type of this interface, which may be:
	• OC-3c MMF or SMF
	• OC-12c MMF or SMF
	The card and port numbers are also shown.
Type	Displays the media type of this interface, which may be:
	•	rcOc3cAtmSM
	•	rcOc3cAtmMM
	•	rcOc12cAtmSM
	•	rcOc12cAtmMM
PhysAddress	MAC address assigned to a particular interface.
VendorDescr	Vendor description.
AdminStatus	Sets the port to either of the following states:
	•	up
	•	down
	When a managed system initializes, all interfaces start with
	AdminStatus in the down state. As a result of either
	management or configuration action, the AdminStatus is
	changed to the up state (or remains in the down state).
OperStatus	Displays the current operational state of the interface, either:
	•	up
	•	down
	If AdminStatus is down, then OperStatus should be down.
	If AdminStatus is changed to up, then OperStatus should
	change to up if the interface is ready to transmit and receive
	network traffic. It should remain in the down state if and only if
	there is a fault that prevents it from going to the up state.
LastChange	Displays the value of sysUpTime at the time the interface
	entered its current operational state. If the current state was
	entered prior to the last reinitialization of the local network
	management subsystem, the value is zero.
OperSpeed	Displays the current operating speed of the ATM port. For
	OC-3c, the operating speed is 155.52 Mb/s; for OC-12c, it is
	622.08 Mb/s.
		Using the Passport 8672ATME Module