Nortel Networks 8672ATME manual Deleting a PVC

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 63

5In the Vpi field, type the VPI-bit size.

6In the Vci field, type the VCI-bit size.

Note: For <vpi.vci>, 0.0 is not supported.

7In the Name field, type the name of the ATM PVC.

8In the Encapsulation field, select the encapsulation method (null or IIcSnap).

9In the Service Type field, select the service type (ubr or vbr).

10If you select vbr in the Service Type field:

a In the PeakCellRate field, enter the PCR (an integer between 86 and 733490).

b In the SustainedCellRate field, enter the SCR (an integer between 86 and 733490).

c In the MaxBurstSize, type the maximum burst size (an integer between 2 and 255).

11Click Insert.

The Insert ATM PVC dialog box closes.

12Click Close.

Deleting a PVC

To delete a PVC:

1On the device view, highlight a port.

2From the Device Manager menu bar, choose Edit > Port.

The Port dialog box opens with the Interface tab displayed (Figure 12).

3Click the ATM PVC tab.

4The ATM PVC tab opens.

5Click a PvcId entry in the table for the PVC you want to delete.

Using the Passport 8672ATME Module