Nortel Networks 8672ATME manual Enabling or disabling a port, Describes the MDA dialog box fields

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 57

Figure 15 MDA dialog box

Table 7 describes the MDA dialog box fields.

Table 7 MDA dialog box fields

Field	Description
Type	Media type:
	•	rc<XXXX>Oc3BaseSM.
	•	rc<XXXX>Oc3BaseMM.
	•	rc<XXXX>Oc12BaseSM.
	•	rc<XXXX>Oc12BaseMM.
Description	MDA type:
	• Quad OC-3c SM — quad port OC-3c single-mode fiber.
	• Quad OC-3c MM — quad port OC-3c multimode fiber.
	• OC-12c SM — single port OC-12c single-mode fiber.
	• OC-12c MM — single port OC-12c multimode fiber.

Enabling or disabling a port

You can enable or disable a port by two methods. To enable or disable a port through the Device Manager menu bar:

1On the device view, highlight a port.

2From the Device Manager menu bar, choose Edit > Port.

The Port dialog box opens with the Interface tab displayed (Figure 12).

3In the AdminStatus area, click up to enable the port, or click down to disable the port.

Using the Passport 8672ATME Module