Nortel Networks 8672ATME Config atm info command, Sample output for the config atm info command

84Chapter 5 Managing the Passport 8672ATME Module with the CLI

Table 21 config atm pvc 1483 ipx command parameters and variables

Parameters and variables	Description
create <vid> <vpi.vci> <ipx>	Creates a routed 1483 IPX circuit on the specified VLAN to the
	specified remote router interface. The optional parameters are:
	• vid means VLAN ID number.
	• vpi.vci means circuit VPI number and the circuit VCI numbers,
	respectively; they are separated by a period.
	• ipx is the IPX Network number of the remote router interface. If this
	number is not given, the first IPX Network number configured for
	the specified VLAN is used.
	Note that the VLAN ID must be previously configured for IPX on this
	port.
	No ARP functionality is available on this IPX segment.
delete <vid>	Deletes the routed 1483 IPX circuit on the specified VLAN.
info	Displays information on routed 1483 IPX circuits.

config atm info command

Figure 29 shows a sample of the output resulting from executing the config atm info command.

Figure 29 Sample output for the config atm info command

number-vpi-bits : 4

scrambling : Enable framing-mode : SONET clock-source : Free Running

loop-back-mode : off state : up

209195-B