Extron electronic MAV Plus Series manual Command/Response Table for IP-Specific SIS Commands

Command/Response Table for IP-Specific SIS Commands

Symbol definitions

X3) = Matrix name (Up to 240 characters)

NThe following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X3! =	Default name	Factory default name (model name + last 3 pairs of MAC address)
X3@ =	Time and date (set)	In the format: MM/DD/YY•HH:MM:SS where:
		MM = month: 01 (January) through 12 (December)
		DD = day: 01 – 31
		YY = year: 00 – 99
		HH = hour: 00 – 24
		MM = minutes: 00 – 59
		SS = seconds: 00 – 59
X3# =	Time and date (read)	In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where
		Day = weekday: Mon – Sun
		DD = day: 01 – 31
		Mmm = month: Jan – Dec
		YYYY = year: 2000 – 2099
		HH = hour: 00 – 24
		MM = minutes: 00 – 59
		SS = seconds: 00 – 59
X3$ =	GMT offset	-12.0 through +14.0 (hours and minutes removed from GMT)
X3% =	Daylight Saving Time	0 = Daylight Saving Time off/ignore
		1 = Daylight Saving Time on (northern hemisphere)
		2 = Daylight Saving Time on (Europe)
		3 = Daylight Saving Time on (Brazil)
X3^ =	IP address	###-###-###-###
X3& =	Hardware (MAC) address	##-##-##-##-##-##
X3* =	Number of open connections	0 – 255
X3( =	Password	12 alphanumeric characters

NThe following characters are invalid in passwords: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X4)	=	Domain name	Standard domain name conventions apply (for example, xxx.com)
N The following characters are invalid in passwords: {space}			~ , =	` [ ] { } < > ‘ “ ; : \ and ?.
		The @ character is only acceptable as the lead-in to the domain name (such as @extron.com).
X4! =		E-mail account	65	– 72. 65 = e-mail recipient #1, 66 = 2, 67 = 3, ... , 72 = recipient #8.
X4@ =		E-mail address	Typical e-mail address format (for example: nnnnn@xxx.com)
X4# -		Notify when?	0 = No response, 1 = fail/missing, 2 = fixed/restored, 3 = both 1 and 2
X4$ =		Notification selections	01	– 64 = input numbers
			98	= power supplies
			99	= fans

X4%

X4^

X4&

X4*

X4(

X5)

X5!

X5@

X5#

= Notify status (for read)		66-digit number. For each digit: 0 = do not notify, 1 = notify.
=	DHCP	0	= off, 1 = on
=	Port #	01 = rear panel Remote port, 02 = front panel Configuration port)
=	Baud rate	9600, 19200, 38400, 115200
=	Parity	Odd, even, none, mark, space (only first letter required)
=	Data bits	7, 8
=	Stop bits	1, 2
=	Port type	0	= RS-232, 1 = RS-422
=	Verbose mode	0	= Clear/none (default for Telnet connection
		1	= Verbose mode (default for RS-232 / RS-422 connection)
		2	= Tagged responses for queries
		3	= Verbose mode and tagged for queries

NIf tagged responses is enabled, all read commands return the constant string and the value as the set command does (for example, the read matrix name command, ECN}, returns IPN•X3)]).

X5$	=	Security level	00	= Anonymous	11 = User
			10	= Extended security levels 1 through 10	12 = Administrator
X5%	=	Port timeout interval (in 10-sec. increments)	1 (= 10 seconds) – 65000 (default is 30 = 300 seconds = 5 minutes)

CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide 4-21