Extron electronic MAV Plus Series Figure 6-18— RGB delay drop box, Figure 6-17— Output selection drop box, 6-18CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation

HTML Operation, cont’d

Change the RGB delay (systems with CrossPoint 450 Plus sync BMEs\⤀

The RGB delay interval defines how long the screen is blanked when switching to a new input for the selected output. This value can be set from 00 to 5 seconds in 0.5-second increments.

Change the RGB delay as follows:

1. Click the Output drop box. A drop-down scroll box appears (figure 6-17).

Figure 6-17 — Output selection drop box

2.	Click and drag the slider or click on the scroll up button or scroll down
	button until the desired output is visible.
3.	Click the desired output.
4.	Click the RGB delay drop box. A drop-down scroll box appears (figure 6-18).

Figure 6-18 — RGB delay drop box

5. Click the desired RGB delay.

6-18 CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation