Extron electronic MAV Plus Series manual EX1 ZR, EX1 *X1@ ZP

Zpz]

Zpa]

Zpv]

Zpg]

ZpgX(]

Zpr]

ZprX1)]

Zpp}

ZppX1)*X1@]

Zpd]

Zpx]

Zpq]

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued\⤀

Command	ASCII command	Response	Additional
	(host to switcher\⤀	(switcher to host\⤀	description

Lock (executive\⤀ modes

NSee “Setting the front panel locks (Executive modes)” in chapter 3, “Operation”, for more Lock mode information.

Lock all front panel functions	1X	Exe1]	Enable Lock mode 1.
Lock advanced front panel	2X	Exe2]	Enable Lock mode 2.
functions
Unlock all front panel	0X	Exe0]	Enable Lock mode 0.
functions
View lock status	X	X#]

Resets

Reset all mutes	EZZ}
Reset audio input levels	EZA}
Reset audio output levels	EZV}
Reset global presets and	EZG}
names
Reset one global preset	EX(ZG}
Reset room map	EZR}
Reset individual room	EX1)ZR}
Reset all room presets and	EZP}
names
Reset individual room	EX1)*X1@ZP}
preset
Reset RGB delays	EZD}
Reset whole switcher	EZXXX}
Absolute reset	EZQQQ}

Unmute all outputs.

Reset all audio input levels (gain and attenuation) to 0 dB. Reset all audio output levels (volume) to 100% (no attenuation).

Clear all global presets and their names.

Clear global preset X(. Clear all room definitions.

Delete room X1).

Clear all room presets and names.

Clear an individual room preset and name.

Reset all RGB delays to 0.0 seconds.

Clear all ties and presets.

Similar to Reset whole switcher, plus clear the IP address to 192.168.254.254 and subnet mask to 255.255.000.000.

Information requests

Information request I

Example:I (MAV 450 Plus 6448 with

a connected audio BME)

VX$XX@•AX$XX@TX1*UX1(]

VX$XX@ = video size, AX$XX@ = audio size,

TX1* = BME type,

UX1( = # of BMEs in system.

V64X48•A64X48•T2•U2]

This low resolution matrix switcher (T2) has 64 video and 64 audio inputs by 48 video and 48 audio inputs. This is a two BME system (a video and audio BME).

N X@ = Output number	01		– (maximum number of outputs for your model)
X# = Lock mode	0, 1 or 2
X$ = Input number	01		– (maximum number of inputs for your model)
X( = Global preset #	01		– 64
X1) = Room # (for room presets)	01		– 10 (Each can have up to 10 presets (X1@s) assigned.)
X1@ = Room preset #	01		– 10
X1* = BME type	1	= wideband video		3	= sync	5 = mono audio
X1( = # of connected BMEs	2	= low resolution video		4	= stereo audio
	1	– 6

4-18 CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide