Extron electronic MAV Plus Series manual Status window

Hardware status — Provides an overall view of the status of the matrix switcher, including the power supply voltages, the temperature status, the Remote RS-232/RS-422 port configuration, and the installed and updated firmware status (figure 5-16).

Green — Proper operation.

Red — Component has failed.

White — Component is not installed.

Figure 5-16 — Status window

Name presets — Allows you to assign a name to each of the 64 global memory presets and 100 room presets.

NPreset names are limited to 12 upper- and lower-case alphanumeric characters, space, and the _ and / characters.

NThe following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Show RS-232 Strings — Displays the ASCII commands that are used by the current configuration. You can refer to these for SIS programming.

I/O group settings — Allows you to establish I/O groups.

Room configuration — Allows you to assign outputs to rooms or delete outputs from rooms.

NA Room is a subset of outputs that are logically related to each other, as determined by the operator. The matrix switcher supports up to 10 rooms, each of which can consist of from 1 to 16 outputs.

Initialize — Initializes and clears any or all of the following: ties, presets, preset names, icon names, and icons.

CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-21