Extron electronic MAV Plus Series manual +QX!*X@!...X!*X@! Qik, @ %, Description

Tie input 1 to output 3.

Tie RGB only (video breakaway).

Tie input 10 RGB to output 4.

Tie video only (video breakaway).

Tie input 7 to video output 5.

Tie audio only (audio breakaway).

Tie input 24 audio to output 4.

!, &, %, and $ are valid.

Tie input 3 video and audio to output 4, tie input 3 video to output 5, and tie input 3 audio to output 6.

Tie video and audio (audio follow).

Tie input 5 video and audio to all outputs.

Tie RGB only (video breakaway). Tie input 28 RGB to all outputs.

Tie RGB only (video breakaway).

Tie input 14 video to all outputs.

Tie audio only (audio breakaway).

Command/response table for SIS commands

Command	ASCII command	Response	Additional
	(host to switcher\⤀	(switcher to host\⤀	description

Create ties

N• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24$.

•The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.

•The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003$).

•The ! tie command, & tie command, and % tie command can be used interchangeably.

NWhen you create a tie where X! = 00, you tie no input to the specified output (X@) (untie X@). When you create a tie where X@ = 00, you untie all outputs from input X!.

NThe & tie commands for RGB and % tie commands for video can be used interchangeably.

Tie input X! to output X@,	X!*X@!	OutX@•InX!•All]	Tie input X!'s video and
video and audio			audio to output X@
			(audio follow).

Example:

Tie input X! to output X@, RGBHV only

Example

(see 2nd Note, above):

Tie input X! to output X@, video only

Example

(see 2nd Note, above):

Tie input X! to output X@, audio only

Example

(see 2nd Note, above): Quick multiple tie

Example:

Tie input to all outputs, video and audio

Example:

Tie input to all outputs, RGBHV only

Example

(see 2nd Note, above):

Tie input to all outputs, video only

Example

(see 2nd Note, above):

Tie input to all outputs, audio only

1*3!Out03•In01•All]

X!*X@&OutX@•InX!•RGB]

10*4&Out04•In10•RGB]

X!*X@%OutX@•InX!•Vid]

7*5%Out05•In07•Vid]

X!*X@$OutX@•InX!•Aud]

24*4$Out04•In24•Aud]

E+QX!*X@!...X!*X@!} Qik]

E+Q3*4!3*5%3*6$} Qik]

X!*!InX!•All]

5*!In05•All]

X!*&InX!•RGB]

28*&In28•RGB]

X!*%InX!•Vid]

14*%In14•Vid]

X!*$InX!•Aud]

View ties

NThe & view tie command for RGB and % view tie command for video can be used interchangeably.

View video and audio	X@!	X!]	Input X! video and audio is
output tie			tied to output X@.
View RGB output tie	X@&	X!]	Input X! RGB is tied to
			output X@.
View video output tie	X@%	X!]	Input X! video is tied to
			output X@.

N X! = Input number for tie	00	– (maximum number of inputs for your model) (00 = untie)
X@ = Output number	00	– (maximum number of outputs for your model) (00 = untie)
CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide			4-9