Extron electronic MAV Plus Series manual Preferences menu, Ties shown as crosspoints

Matrix Software, cont’d

Preferences menu

Immediate Changes — Causes configuration changes to take effect immediately.

Hold/Verify Changes — Delays implementation of configuration changes until the Changes – Take button is pressed.

Ties as Lines — Displays ties as lines (below).

Ties as Crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-17). Ties that have been made are indicated as amber or green boxes. Ties that will take effect when you click the Take button are indicated by +. Ties that will be broken when you click the Take button are indicated by –.

Figure 5-17 — Ties shown as crosspoints

Frequency-read options (CrossPoint only) — Allows you to set the input signal detection (DSVP) feature as follows:

•To never sample and display the sync or no sync status (select None)

•To automatically refresh the display (select Automatically every 10 seconds)

•To sample the sync and update the display whenever you make a configuration change (select On demand or by refresh).

Limit ties to same group — Allows you to limit the creation of ties using the program to inputs and outputs that are in the same group (similar to front panel operation).

5-22 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software