Extron electronic MAV Plus Series manual Miles Standish, Mail Addressee fields

Matrix Software, cont’d

E-mail Addressee fields

The eight E-mail Addressee fields permit the administrator to identify the e-mail addresses of the personnel to whom the matrix switcher e-mails notification of its failure and repair status. The following figure shows a typical e-mail from the switcher.

Miles Standish

From:	CP-450-MAV-Plus-FF-FF-09@folklore.net
Sent:	Friday, March 03, 2006 11:22 AM
To:	Miles Standish
Subject:	CP-450-MAV-Plus-FF-FF-09 - Fan #1 is now running in BME 5
Fri, 03 Mar 2006	11:21:48

Unit Name = CP-450-MAV-Plus-FF-FF-09

Unit IP Address = 192-168-254-254

The radio buttons and check boxes associated with each address field permit the administrator to specify e-mail requirements for each recipient.

Edit these fields and controls as follows:

1.	Click in the desired E-mail Addressee field. The pointer tool becomes a text
	cursor.
2.	Edit the e-mail address as desired. Standard e-mail address conventions
	apply (for example: nnnnn@xxx.com).
3.	Press the Tab key on the keyboard or click in another field to exit the e-mail
	addressee field.
4.	In the square check boxes associated with each addressee, select one or more
	options about which the addressee is to be e-mailed: missing input(s), fans,
	and power supply. In the floating box that contains the input numbers, select
	the inputs to be monitored.
5.	In the round radio buttons associated with each addressee, select whether the
	addressee is to be e-mailed of failures, fixes, both, or not be notified.
	The None radio button is useful for temporarily removing personnel from the
	e-mail list when they are unavailable, such as on travel or vacation.
6.	If desired, click on the Send test E-mailbutton to test the e-mail function.
7.	Click on the Take button to make the e-mail address changes take effect.

5-12 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software